Waterproof Flat Banner Splicing Hot Air Welder Machine With CE ,
CE AUTO Hot Air PVC Banner Welder
Machine description :
The automatic banner welding machine is designed to weld plastic
materials. It can weld advertising inkjet fabric, inkjet cloth,
light box cloth,PVC banner cloth,plastic cloth, tarpaulin and other
PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot
melted. It is small, light and easy to operate. It is equipped with
temperature feedback sensor. The sener can always monitoring the
temperature of the outlet to keep a constant temperature. It uses
advanced PID control technology, and adjust the power to make the
temperature more constant automatically,the fluctuation is within 1
degrees. This function can make the welding result stronger. It
also can avoid leakage. This machine is more suited to fast welding
Operate Attention :
► Any part of this machine being bumped of fallen can cause some
damage impossible to be repaired.So please pay attention to carry
it.It is suggested to move the machine by manpower and put it down
► The place for installation must be flat and the floor is strong
enough to support the machine and moreover, the installation place
should close to power supply
► Please check if there is damage or missed parts after unpack the
machine.Any problem, please contact us or the local agent
► Please sweep away the anti-rust oil from the machine with detergent
and re-lubricate with light lubricating oil after installation
► Keep the installation place no dust and avoiding sunshine
Please Feedback Get More Information .
Operation Steps :
Digital Display :
A : Make the cloth for seaming flat and put it underneath.Fix both
ends by adhesive tape or something else.
B : The overlap width of the two pieces is about 3-mm, the width of
the nozzle of hot seaming machine.
C : Put the machine nozzle between two overlap pieces.The
press-wheel should be at left side of nozzle.The nozzle also need
align with side of upper piece of cloth.
D : Switch on the motor power and then adjust speed.
E : Turn on the movement switch.
F : Press heating power key to adjust temperature.
G : Turn the bar by anticlockwise to fix the position to startup
automatic movement.The machine will go along with the overlap path
H : Turn the bar by clockwise to cease the automatic work.
I : The operator should control the moving direction and make sure
the nozzle connect both with upper and under piece of cloth
♦ If the surface cloth is dissolved and scorched or the cloth are
not sticked together, please stop to adjust the temperature or
♦ If the seaming part is not in right position, please stop to
adjust fixing position .
♦ Adjust temperature to zero before turn off the heater . Switch off
after 5-10 minutes .
♦ Before weld , make sure the clothes are flat so that stick
together smoothly .
♦ The hot wind of heater cannot touch the press - wheel or the
rubber of press-wheel is easy to be burned down .
Please Feedback Get More Information .
Q : What kind of materials can it weld ?
A : It can weld waterproof tent , flex banner and other outdoor
materials that can be hot melt .
Q : Are the work speed and temperature adjustable ?
A : Yes , the work speed and temperature are adjustable , speed is
1-15m/min , temperature range is 0-600 degree .
Q : Is it automatic work ?
A : Yes , It's Automatic weld with three wheels , work speed are
Q : Which kinds of hot air gun does it use ?
A : Our Flex Banner Welding Machine used long life Leister hot air gun
Q : How long is the warranty period ?
A : Our company provide one year free Warranty , you can free change
spare parts .
Q : What's the MOQ of the PVC plastic welder ?
A : The MOQ is One set .
ShenZhen MingYang Digital Technology company offer high quality plastic welding equipment for accurate plastic
welding. Accurate plastic welding is very important for plastic
industry.We offer perfect after service, and offer free maintenance
for machines. We could offer all spare parts if customer wants to
do maintenance by themselves, and offer all the structure diagram
for free, includes the welding technical guide.
We assure you :
► With good quality Flex Banner Welding Machine
► Timely offer the best price to you
► Arrange the fast and safe shipping
► Provide one year good after-sales service
Feedback Me :
Any questions or demand about our Auto Hot Air PVC Plastic Banner
Welding Machine , Please send your kind Inquiry Details at the
below , Click " Send " Now Or Contact me Now !
Thank you !
Please Send Your Inquiry Details At The Below To Get More