400 Degree Easily Operate And Widely Used Hot Air Banner Welding
Machine With Original Leister Heat Gun
We are a Professional Export Trade Company . Sale many kinds of
Machine and materials about the Advertising Industry .
About The Leister hot air welding TOP 2000 B machine , details as
Welder Model : Top 2000 B
Welding Voltage : 110/220V
Welding Area : 2-4cm
Welding Thickness : 0.22-2mm
Welding Temperature : 350-400 Degree
Wheel Materials : Aluminum
Welding Power : 1800 W
Welding Materials : PVC / Flex / Banner / Plastic and other
materials can be hot melt
Welding wire : 10 meters
Welding Speed : 5-15m/min
► Any part of this machine being bumped of fallen can cause some
damage impossible to be repaired.So please pay attention to carry
it.It is suggested to move the machine by manpower and put it down
► The place for installation must be flat and the floor is strong
enough to support the machine and moreover, the installation place
should close to power supply
► Please check if there is damage or missed parts after unpack the
machine.Any problem, please contact us or the local agent
► Please sweep away the anti-rust oil from the machine with
detergent and re-lubricate with light lubricating oil after
► Keep the installation place no dust and avoiding sunshine
Connecting the power supply:
Connecting the electric wire to the reserved plug(AC220V)of
Take care the nozzle.Use brush to clean if there is dust or block
in the nozzle or filter.
Operation Step :
1. Make the cloth for seaming flat and put it underneath.Fix both ends
by adhesive tape or something else.
2.The overlap width of the two pieces is about 3-mm, the width of
the nozzle of hot seaming machine.
3.Put the machine nozzle between two overlap pieces.The press-wheel
should be at left side of nozzle.The nozzle also need align with
side of upper piece of cloth.
4. Switch on the motor power and then adjust speed.
5.Turn on the movement switch.
6.Press heating power key to adjust temperature.
7.Turn the bar by anticlockwise to fix the position to startup
automatic movement.The machine will go along with the overlap path
8.Turn the bar by clockwise to cease the automatic work.
9.The operator should control the moving direction and make sure the
nozzle connect both with upper and under piece of cloth
General instruction for safety :
♦ Keep the working place clean. Messing up and the disorderly
working place cause disaster
♦ Choose the work place carefully and use the machine in a bright
and dry circumstance.
♦ For safety and the long life of the machine, please do not let the
machine operates overtime.
♦ The electricity, controlling box and protective facilities have to
be in the proper order after finishing daily work. The electrical
power supply has to be switched off definitely.
♦ The machine has to be stopped before gets maintenance or replacing
♦ Use standard or indicated tools when dismantling or replacing
♦ If any special incidents happened, please stop the machine first
for repairing, And do not deal with the special incident with
♦ If the machine is operated on land, keep the work place clean and
no dust there. If dust or something blocks the inhaling filter of
heater, the heating wind can not come cut adequately and then
temperature inside of filter will rise to let the heater burn down.
Operation Notice :
♦ During operating, if the surface cloth is dissolved and scorched
or the cloth are not sticked together, please stop to adjust the
temperature or speed.
♦ During operating,if the seaming part is not in right position,
please stop to adjust fixing position.
♦ Adjust temperature to zero before turn off the heater.Switch off
after 5-10 minutes
♦ During operating, make sure clothes are flat so that stick
♦The hot wind of heater cannot touch the press-wheel or the rubber
of press-wheel is easy to be burned down.
1. Q : What is the use of the machine ?
A : Use hot air to make the PVC Banner welding together
2. Q : What kinds of materials can it welding ?
A : It can welding PVC / Banner / Flex and other outdoor materials
can be hot melt
3. Q : What's the machine work type ?
A : It's Automatic welding
4. Q : Which kinds of hot air gun it use ?
A : Leister hot air gun
5. Q : How long is the warranty period?
A : The Warranty is one year
6. Q : What's the MOQ ?
A : The MOQ is One set of Welding machine
Thanks for your kind Reading ! Any questions contact me !